Xylem Bell & Gossett e-1531 Series Quick Start Manual page 7

For safety and correct product usage, read the manual before this product is used.
Position number
3
4
5
6
7
8
9
6 Xylem App setup
Introduction
Available for mobile devices with wireless technology operating system.
Use the App to:
• Check the status of the unit
• Configure parameters
• Interact with the unit and obtain data during installation and maintenance
• Generate a work report
• Contact the assistance service.
Download the App and connect the mobile device with the unit
1. Download the Xylem X App to the mobile device from App Store
2. Complete the registration.
3. On the drive display, press the woreless communication button.
4. Add the unit to the user profile.
5. When the connection has been established, the connection light turns steady blue. It is now possible to control the unit using the mobile device.
1 ®
Compatible with iOS operating systems with version 15.0 and above.
2
Compatible with Android operating system with version 10.0 and above.
Name
UP and DOWN arrow keys
RIGHT and LEFT arrow keys
SEND button
Unit LED on
Unit status LED
Connection status LED
Multifunction button
1 2
or Google Play by scanning the QR code:
Function
• Move vertically between menu options
• Perform a manual switch-over on a multi-pump
system by pressing the DOWN arrow (extended
pressure)
• Rotate the display 180° by simultaneously pressing
ENTER and the UP arrow (extended pressure).
• Move horizontally to navigate home screens and
menus
• Lock and unlock the display by simultaneously
pressing the RIGHT and LEFT arrows (extended
pressure).
• Advancing through the menu levels
• Confirm the selection of a parameter
• Confirm the value of a parameter.
Indicate that the unit is powered.
Indicate:
• Motor no powered (off)
• Alarm active and motor stopped (yellow)
• Unit error and motor stopped (red)
• Motor started (green)
• Alarm active and motor started (yellow alternating
green).
Indicate
• BMS comunication disabled (off)
• BMS communication active (green)
• Wireless communication with mobile device estab‐
lished (fixed blue)
• Wireless communication with mobile device being
established (flashing blue)
• Wireless communication and BMS communication
active (blue alternating green).
• Access the parameter menu or additional functions
according to the screen on the display.
• Enable the unit to a mobile device (extended pres‐
sure)
7