Set Point; Internal Light - Foster EMD700G User Manual

Set Point

To display the appliance Set Point, with the display showing the temperature, press button 2 for 3 seconds
and the display will show 'SP' . Then press button 1 once to display the current set point.
Adjust the set point using button 2 to increase and button 4 to decrease. Press button 1 to save the new
value and the display will show 'Loc' . If button 1 is not pressed the new value will not be stored. Exit by
pressing button 3.
If the Set Point cannot be adjusted to the value required please contact your authorised Foster dealer for
advice.
The display will resume normal operation after 30 seconds or if button 3 is pressed.
Keypad Security Settings
The keypad can be locked to prevent unauthorised adjustment of the appliance and it's operating
temperature.
When the keypad is locked no adjustments can be made using the keypad and icon 'f' will be displayed.
To lock or unlock the keypad press and release button 2 for 3 seconds and the display will show 'SP' .
Release the button and then press button 2 once and the display will show 'Loc' . Press button 1 to display
the current keypad lock status. Adjust using button 2 and button 4 to set the value to 'Yes' to lock the
keypad and 'no' to unlock the keypad. Press button 1 to save the new value. If button 1 is not pressed the
new value will not be stored. The display will resume normal operation after 30 seconds or if button 3 is
pressed.

Internal Light

The lights are operated by pressing button 5. Press once to turn the lights on or off.
Defrost
The appliance has an automatic defrost function and will defrost periodically each
day without any user intervention. This process is normal and does not affect product
stored in the appliance. During defrost the appliance can be used as normal.
To start a defrost manually press and hold button 1 for 5 seconds. This will turn
off the appliance. When this happens do not release the button and after 2 more
seconds the display will indicate a defrost has commenced (dEF is briefly displayed)
and the button can be released. The appliance set point temperature will be
displayed during defrost and icon 'g' will flash to indicate a defrost is in progress.
The defrost will operate for it's full duration, it is not possible to cancel a defrost when
it has started.
EMD Multideck - User Manual
11