Table of Contents
Advertisement
2
Removal of packaging
Prior to carrying out this operation please ensure that these instructions have been read, understood
and that the necessary personnel and tools are available to ensure that these instructions are complied
with. It is also recommended that a full assessment of the installation conditions and requirements be
conducted prior to commencing this operation.
Tools required: A sharp retractable knife or scissors
Pliers or cutters suitable to cut hard plastic
A Philips screwdriver
The appliance weighs up to weight up to 230kg when empty and requires at least 4 people to
carry out these instructions.
Never lift more weight than you are comfortable with. Any lifting should be carried out using
correct lifting techniques.
Never stand directly in line or under the appliance when it is leaning at an angle while carrying
out these instructions.
The appliances are top heavy and care should be taken when manoeuvring on uneven or sloping
surfaces. Do not manoeuvre the appliance without assistance.
It is recommended that gloves are worn when carrying out these instructions.
Never move the appliance using the doors as a hand hold or pulling point.
Do not use the doors as a hand hold or pulling point.
1
Position the rear of the pallet against a flat,
level surface of a similar height to the pallet.
2
Remove outer plastic and cardboard. Take
care not to damage the appliance with any
sharp objects used to remove the
packaging.
6
Installation
www.fosterrefrigerator.com
Advertisement
Table of Contents
