3.3 Editing the route
When navigation has already started, there are several ways to modify the planned route. You have the
following options:
•
Setting a new starting point, see page 45
•
Adding an additional destination, see page 46
•
Modifying the list of destinations, see page 47
•
Saving the planned route, see page 47
•
Deleting the planned route, see page 48
•
Selecting a route alternative when planning the route, see page 48
•
Selecting a route alternative for an existing route, see page 49
•
Pausing guidance, see page 1.
3.3.1 Setting a new starting point
For normal navigation, all routes are calculated from the current position. You can pause navigation to
check future routes, simulate them or see their length in time and distance. Then you can set the starting
point of the route to a location other than the current GPS position.
1.
Press the navigation hardkey button to access the Navigation menu.
2.
In the Navigation menu, tap
3.
The first line from the bottom is the start of the route, normally the current GPS position. Tap
.
, select
, and confirm your action at the warning message.
45