Gps Position Markers; The Planned Route - Alpine KTX-NS01 User Manual

2.3.2 GPS position markers

When your GPS position is available, Alpine USB Navigation marks your current position. By default, this
marker is a blue arrow. The dot near the arrow shows the GPS position as perceived by the GPS
receiver.
When on-road navigation is selected, the current position marker may not show your exact GPS position
and heading. If roads are near, it is aligned to the nearest road to eliminate GPS position errors, and the
direction of the icon is aligned to the direction of the road.
If you select off-road navigation, the current position marker is at your exact GPS position. The direction
of the icon shows your current heading.

2.3.3 The planned route

The planned route is the currently navigated route. Whenever the destination is set, the route is active
until you delete it, reach your destination or suspend navigation. Alpine USB Navigation displays the route
in the following ways:
Symbol Name
Current GPS position
and starting point
Waypoint (intermediate
destination)
Destination (end point)
Route color
Streets and roads that
are excluded from the
navigation
It is your current position displayed on the map.
•
If a vehicle is selected for route calculation and roads are near,
the arrow jumps to the nearest road.
•
The dot near the arrow shows the exact GPS position.
Normally, if GPS position is available, the route starts from the current
position. If there is no valid GPS position, Alpine USB Navigation
uses the last known position as the starting point.
It is an intermediate destination of the route before reaching the final
destination.
It is the final destination of the route.
The route always stands out with its color on the map, both in daytime
and night color modes.
You can choose whether you want to use or avoid certain road types
(page 66). However, when Alpine USB Navigation cannot avoid such
roads, the route includes them and shows them in a color that is
different from the route color.
15
Description