• Features/General Description of Product
XDA-7002
l
Rugged 19" rack mountable chassis.
l
Heavy duty high current toroidal transformer which provides excellent
regulation and minimises hum & noise.
l
Low distortion and high damping factor for excellent sound quality.
l
Extensive protection circuit for High Temperature (output devices and
transformer), Overload, Over voltage, DC, RFI and Output short circuit.
The amplifier is protected for variations in AC supply (due to Genset / AC
Mains fluctuation) up to 270V.
l
Indicator LEDs for Signal, Clip, Temperature (output devices and
transformer), Protect mode, ON/ Fault conditions.
l
Output termination on Dual Connectors (Speakon 4-way & Binding Post)
for each channel.
l
Built in limiter circuit, which protects the amplifier and speaker from being
over driven because of high input level signal.
l
Balanced / Unbalanced input signal through parallel XLR and 6.3mm (¼")
stereo phone jack in both channels.
l
Slide switch selection of Mono / Stereo Mode provided on rear panel.
l
Switchable ground lift to break the unwanted ground loops.
l
Low pass filter switchable to 80Hz or 120Hz, to use for subwoofer
applications.
l
Limiter On/Off switch.
4