Ahuja XDA-7002 Operation Manual page 2

• Safety Instructions
Read the Instructions: Please read all the instructions in this section carefully before installation or use of the
product. All the safety instructions must be followed.
Retain the Instructions: Please retain this Instruction Manual for future reference.
This symbol, wherever it appears, alerts you to the presence of uninsulated hazardous voltage that
may be sufficient to constitute a risk of electric shock. External wiring to any terminal marked with this
symbol must be done by a trained and instructed person only.
This symbol, wherever it appears adjacent to a component, alerts you that the concerned
component can only be replaced by another of the exact same specifications.
WARNING
To reduce the risk of electric shock, do not remove the top cover. No user serviceable parts inside. Refer all
l
servicing to qualified personnel only.
Before replacing any fuse, make sure the set is switched off and disconnected from the AC mains or any other
l
power source. Replace a fuse only with another of exactly same specification.
CAUTIONS
Water & Moisture: To reduce the risk of fire or electrical shock, do not expose this set to rain or moisture. Do not
use this set near water or in a wet location. Do not keep any object filled with liquid, such as a vase, on top of this set.
Do not insert or remove the AC mains plug with wet hands.
Power Source: The voltage & frequency of the AC mains supply, to which this set can be connected, is marked on
the rear panel of the set. Do not connect this set to any power source other than those specified on the rear panel.
Power Cord Protection: Do not cut, kink, damage or modify the AC power cord supplied with this set. Keep the
AC power cord away from heaters and harmful chemicals. Do not keep any heavy object on the power cord.
Operation on Generator: When operating this set on a generator, make sure the set is switched off till the
generator voltage has stabilized.
Ventilation: This set should be situated so that its location or position does not interfere with its proper ventilation.
Do not cover the ventilation holes / slots. Do not insert or drop anything into the ventilation holes / slots.
Stability: This set must be kept in a stable and flat horizontal position, and never in a tilted position. Do not place this
set on an unstable stand, tripod, bracket or mount. Do not use attachments which are not supplied or explicitly
recommended by the manufacturer.
Earthing: This set must be earthed properly before use. A wire from the Earth terminal on the rear panel must be
connected to electrical earth.
Cleaning: Disconnect this equipment from the AC mains and external battery before cleaning. Clean with a damp
cloth, but do not allow any liquid to enter the set. Do not clean with liquids or aerosols.
XDA-7002
2