Page 1
800W RMS / 1050W Max. UBA-800DP 8 Thank you for purchasing the AHUJA PA Amplifier. 8 Please read this manual thoroughly before making connections and turning on the power. Following the instructions in this manual will enable you to obtain optimum performance from your new AHUJA PA Amplifier.
Cleaning: Disconnect this equipment from the AC mains and external battery before cleaning. Clean with a damp cloth, but do not allow any liquid to enter the set. Do not clean with liquids or aerosols. Exposure to Heat: Do not touch the heatsinks while the set is working. UBA-800DP...
Designed for use in a wide variety of PA applications and DJ performances. ! UBA-800DP is a 800 Watts amplifier which can be connected to various input sources like a Microphone, PA Mixer, CD player, DJ Mixer, Cassette player, Keyboard etc.
The glowing of this yellow LED indicates excessive temperature of the output devices. The 14. MIC Volume Control protection circuit then mutes the input signals. The amplifier will remain at mute status, till the amplifier cools down to normal temperature. UBA-800DP...
For accepting an unbalanced signal from an current flow. Caution ! The equipment must be earthed properly before operating it to avoid electric shock. A wire from the Earth Terminal must be connected to electrical earth for safe operation. UBA-800DP...
Pressing NEXT repeatedly will move the system to successively next forward tracks. Prev: Press PREV to Select the previous track. Battery Pressing PREV repeatedly will move the system to Pull Tray successively previous tracks. Push to Lock UBA-800DP...
Select the MP3 programme from mobile phone or laptop and press PLAY. The same song starts playing on the Ahuja Amplifier. We can SELECT Volume, FF, Rewind, Play/Pause function either from keys on the Amplifier or through Remote Control.
(Refer to page 9 for illustration) AMX-812 TP-50 Microphone Cassette Player PA Mixer POWER DMX-40 ECHO-REVERB Echo Mixer PA Amplifier Wireless Microphone (ON FRONT PANEL) UBA-800DP (Rear Panel) Keyboard Aux Input (100mV) Aux Input (250mV) DJ-MIXER DJ Mixer Program Speakers Booster Amplifier CD Player UBA-800DP...
• Speaker Connection Guidelines UBA-800DP is a high-powered amplifier. Therefore it is very important that correct loudspeaker connections are made to avoid damage to the amplifier or speakers. Low Impedance Speaker Connections ! Box type Speakers can be directly connected to Com-2 / 4 / 8 Terminal Strip.
UBA-800DP using a patch cord with RCA plugs at both ends. 2. Connect the Line Out of the first UBA-800DP to the Line In of the second UBA-800DP using a patch cord with ¼” phone plugs at both ends.