Table of Contents
Advertisement
Available languages
Available languages
A
D Fer g
| Speaker output adjustment
|
6
Press LEVEL to select speakers to adjust the
output level.
The output level appears on the display, and the speaker indica-
tor for the selected speaker flashes.
Each time the button is subsequently pressed, the speaker
whose level is to be set is selected in the following sequence:
C—RS—LS—SW
ja
PE
Speakers for which NONE or NO has been set are skipped.
Press LEVEL [+] or [—] to adjust the output
level.
The levels for C, RS, LS and SW can be adjusted in 1 dB incre-
ments from —12 dB to +12 dB. Use the output test signal from
the front (L, R) speakers as a benchmark to adjust the output
levels in such a way that the test signal is heard at the same
strength from each of the speakers.
Adjusting the volume balance between the
left and right front speakers
@When the volume level between the left and right front speaker is
unbalanced, proceed to the following steps.
if this unit is connected to a receiver or amplifier having the left and
right balance control, adjust the left and right balance on the com-
ponent (receiver or amplifier) and skip the following steps.
Refer to the instruction manuals of the components.
Press BALANCE [L] or [R] on the remote con-
trol to adjust the volume balance.
The left/right balance appears on the display.
Each time the button is subsequently pressed, the output level
of the front speaker opposite to the button pressed is decreased.
Example: When the L button is pressed, the output level of the
R speaker is decreased.
The original display is restored if no buttons are pressed for 4 or
more seconds.
The volume balance of the surround speakers cannot be ad-
justed using the BALANCE buttons.
To re-adjust the output level of each speaker,
repeat the procedures from step 4.
To stop the test signal
Press TEST.
Oper
oo
Advertisement
Table of Contents
