Grandstream Networks WP810 User Manual page 24

1. Type in the admin password in the Current Password field
2. Type in your new admin password in New Password field.
3. Type in again same entered password in Confirm Password field.
5. Press Save button to save your new settings.
Important
DO NOT USE same password for both user and admin accounts.
The password is case sensitive with maximum length of 1 to 512 characters length.
Changing HTTP/HTTPS Web Access Port
1. Access the Web GUI of your handset using the admin's username and password. (Default username and password are admin/Random password from the
sticker on the back of the unit.).
2. Press Login to access your settings.
3. Go to Maintenance �� Security Settings �� Security
4. In Web Access Mode, select the access method depending on desired protocol (HTTP or HTTPS or Both)
5. Locate HTTP / HTTPS Web Port field and change it to your desired/new HTTP / HTTPS port.
Note: By default, the HTTP port is 80 and HTTPS is 443.
6. Press Save button to save your new settings.
Note
After modifying the connection method or port, the web GUI will be automatically logged out and redirected to the new address.
Figure 14: Admin Level Password