Grandstream Networks WP810 User Manual page 18

Display the call history: Missed Calls, Accepted Calls, Outgoing Calls or All Calls. You can add contacts to Shared Contacts directly from
Call History
call logs.
SMS stands for Short Message Service and referred to as a "text message". With a SMS, you can send a message by pressing "New
SMS
Message" of up to 160 characters to another device or check the received ones.
Select: Play voice mail messages received.
Voice Mail
Note: Voicemail ID needs to be configured, otherwise, "select" softkeys will open configuration settings.
● LCD Test
● LCD off
● LED Test
● Keypad Test
Diagnostics
● Audio Loopback
● Proximity Sensor
● Vibration
● Verify Certificate
● Account: Configure/View SIP accounts settings and account ringtone.
● Call settings: Configure the account auto answer, call forward, DND and speed dial settings.
● Network Settings: Configure the networks settings including Wi-Fi settings, and additional networks settings.
Settings
● Basic Settings: Configure the basic settings including voice settings, display settings, Gestures and button customization, language settings
and date/time settings.
● Adv. Settings: Configure the advanced settings including system upgrade, PTT/Paging settings, system security settings, syslog settings
and factory reset / reboot.
Displays account status, system info, Network status and network statistics
● Account status
● System Info: Press to enter the sub menu for Running memory, Storage status, MAC address, System version, Recovery version, U-boot
version, Kernel version, Hardware version, PN number, Country code and Running time.
Status
● Network status: Press to enter the sub menu for MAC address, IP setting information (DHCP/Static IP), IPv4 address, IPv6 address,
Subnet Mask, Gateway, DNS server.
● Network Statistics: Press to enter the sub menu for Network SSID, BSSID, IP address, Signal strength, Connection speed, Channel,
Frequency, Tx packets, Tx error packets, Tx error rate, Tx drop packets, Tx drop rate, Rx packets, Rx error packets, Rx error rate, Rx drop
packets, Rx drop rate.
Keypad
The WP810/WP822/WP825 keypad can be used by tapping on an input field. The keypad has 4 modes "Ab3", "ABC", "abc" and "123". Default mode is
"Ab3".
Table 11: Handset Menu