Yamaha SPX1000 Operation Manual page 60

STATUS 1001nnnn ( 9 n H )
NOTE No. 0kkkkkkk
VELOCITY ovvvvvvv
Note Off
This message is used when playback of the Memory No. 24 FREEZE 2 is finished.
The velocity value is ignored. The reception conditions are the same as in
Note On.
STATUS l000nnnn (8nH)
NOTE No. 0kkkkkkk
VELOCITY ovvvvvvv
Control Change
Reception is enabled on the MIDI channel of the currently selected bank. When
receiving, parameters can be controlled. Change them by using the corresponding
controller based on the Control Assignment List.
STATUS 1011nnnn (BnH)
CONTROL N O . 0ccccccc
CONTROL VALUE 0vvvvvvv
Program Change
Reception is enabled on the MIDI channel of the currently selected bank. When
receiving, the desired program can be loaded, based on the program change chart
of that particular bank.
n=0(Channel No.1)~15(Channel N o . 1 6 )
k=0(C-2)~127 ( G 8 )
v=0~127
n=0(Channel No.1)~15(Channel N o . 1 6 )
k = 0 ( C - 2 ) ~ 1 2 7 ( G 8 )
v=0~127
n=0(CHANNEL NO.1)~15(CHANNEL N O . 1 6 )
c=0~120
v=0~127
Add-23