Yamaha SPX1000 Operation Manual page 55

System Setup Bulk Data
Transmission is enabled on the MIDI channel of the currently selected bank. Data
is transmitted when BULK OUT 2 is displayed and BULK OUT is executed, and when
the SYSTEM SETUP DATA DUMP REQUEST message is received.
STATUS
ID No.
SUB STATUS
FORMAT No.
BYTE COUNT
BYTE COUNT
DATA NAME
SOFT VERSION No. Ovvvvvvv
SOFT VERSION No. Orrrrrrr
DATA
CHECK SUM
EOX
59 Memory/All Banks/All ER Patterns/System Setup Data/Bulk Data
Transmission is enabled on the MIDI channel of the currently selected bank. Data
is transmitted when BULK OUT 1 is displayed and ALL BULK OUT is executed. The
data to be transmitted is the programs of Memory Nos. 41 - 9 9 , all programs of
the 4 bank change charts, the four ER patterns, and the System Setup data. The
transmission order is as follows: programs of Memory Nos. 41 to 9 9 , Bank A
program change chart to Bank D program change chart, ER pattern A to ER pattern
D , and System Setup data.
Add-18
11110000(F0H)
01000011(43H)
0000nnnn(0nH)
01111110(7EH)
00000000(00H)
00011100(1CH)
01001100 ( 4 C H ) " L "
01001101 ( 4 D H ) " M "
00100000 (20H)SPACE
00100000(20H)SPACE
00111000(38H)"8"
00110011(33H)"3"
00110111(37H)"7"
00111000(38H)"8"
01010011(53H)"S"
00100000(20H)SPACE
Oddddddd
16BYTE
Oddddddd
Oeeeeeee
11110111(F7H)
n=0(Channel NO.1)~15(Channel N o . 1 6 )