Changing The Basic Set- Tings; Cleaning And Servicing; Cleaning The Drum - Siemens WG56B2A1GB User Manual And Installation Instructions

Hide thumbs Also See for WG56B2A1GB:
Table of Contents

Advertisement

Set the display brightness:
3
1 (low) to 4 (very high)
Activate (On) or deactivate
5
(OFF) the reminder to clean
the drum.
Display the number of fin-
6
ished programmes.
Restore the appliance to the
7
factory settings (rES).
17.2 Changing the basic set-
tings
Requirement: The display shows all
additional buttons. → Page 20
To call up the basic settings, press
1.
Basic Settings.
Use the programme selector to se-
2.
lect the required basic setting.
→ Page 38
Adjust the basic setting:
3.
To change the value, press
or
.
To reset the appliance to the
factory settings, press and hold
⁠  
for approx. 3 seconds.
Press Basic Settings to save the
4.
settings.
Cleaning and servicing en

Cleaning and servicing

18 Cleaning and servi-
cing
To keep your appliance working effi-
Cleaning and servicing
ciently for a long time, it is important
to clean and maintain it carefully.
18.1 Cleaning the drum
CAUTION
Risk of injury!
Permanently washing at low temper-
atures and a lack of ventilation for
the appliance may damage the drum
and cause injury.
Regularly run a programme for
cleaning the drum or wash at tem-
peratures of at least 60 °C.
Leave the appliance to dry after
every operation with the door
open, and leave the detergent
drawer to dry.
Select the Cottons 90°C pro-
gramme or the drum cleaning pro-
gramme in the Home Connect
app.
Run the programme without laun-
dry but with washing powder that
contains oxygen bleach or a a
cleaning agent for caring for the in-
side of the appliance.
→ "Accessories", Page 31
39

Advertisement

Table of Contents
loading

Table of Contents