Basic Operation; Switching On The Appliance; Setting A Programme; Adjusting The Programme Settings - Siemens WG56B2A1GB User Manual And Installation Instructions

Hide thumbs Also See for WG56B2A1GB:
Table of Contents

Advertisement

en Basic operation
Notes
When using liquid detergents, only
¡
use liquid detergents that are self-
flowing
Do not mix different liquid deter-
¡
gents
Do not mix detergent and fabric
¡
softener
Do not use products that have ex-
¡
pired or are highly congealed
Do not use products containing
¡
solvents, caustic agents or volatile
substances
Do not use chlorine bleach
¡
Do not use dyes regularly as fixing
¡
salt can damage stainless steel
Do not use color-bleaching agents
¡
in the appliance
Do not pour vinegar into the dis-
¡
pensers → Page 35 of the intelli-
gent dosing system

Basic operation

13 Basic operation
Basic operation
13.1 Switching on the appli-
ance
Note: If you switch the appliance on
the first time after you have connec-
ted it to the electrical system, the
switch-on process takes up to one
minute.
Requirement: The appliance has
been correctly installed and connec-
ted.
→ "Installation and connection",
Page 12
Press
.
The switch-on process takes a few
seconds.
An audible function test is carried
a
out.
Note: The lighting for the drum goes
out automatically.
32
13.2 Setting a programme
Turn the programme selector and
1.
set the required programme.
→ "Programmes", Page 27
If required, adjust the programme
2.
settings. → Page 32
Setting additional programmes
Requirement: Home Connect is set
up.
→ "Setting up Home Connect",
Page 37
Set the App programs 
1.
gramme.
If Remote Start 
Press Remote Start  .
2.
The Home Connect app displays
the programmes that can be selec-
ted.
Set a programme in the
3.
Home Connect app.
If required, adjust the programme
4.
settings.
→ "Adjusting the programme set-
tings", Page 32
Start the programme.
5.
→ "Starting the programme",
Page 33
13.3 Adjusting the pro-
gramme settings
Requirement: A programme has
been set.
→ "Setting a programme", Page 32
Adjust the programme settings.
→ "Buttons", Page 24
Observe the information about op-
erating logic → Page 19.
Notes
The programme settings are not
¡
saved permanently for the pro-
gramme.
pro-
flashes,

Advertisement

Table of Contents
loading

Table of Contents