Table of Contents
Advertisement
Button
i-Dos 2
Ready In
(mains switch)
Remote Start
3 sec.
Basic Settings
Selection
Activate
¡
Deactivate
¡
Adapting the
¡
dispenser
Setting the ba-
¡
sic dosage
amount
Up to 24 hours
- 90
- 1600
Switch on
¡
Standby mode
¡
Restart the ap-
¡
pliance
Activate
¡
Deactivate
¡
Opening the
¡
Home Connect
settings
Activate
¡
Deactivate
¡
Multiple selection
More information
Briefly press the button to activate or
deactivate the intelligent dosing sys-
tem for fabric softener
tergent
.
Press the button for approximately 3
seconds to adapt the contents of the
/
dispenser or set the basic
dosage.
→ "Intelligent dosing system",
Page 35
Set the programme end time.
The programme duration is already in-
cluded in the set number of hours.
Once the programme has started, the
programme duration is displayed.
Note: Press
shows the required setting.
Adjust the temperature.
Set temperature in °C.
Adjust the spin speed or activate
(Rinse Hold).
Set spin speed in rpm.
If
is selected, the water is not
drained at the end of the washing
cycle and the spin cycle is deactiv-
ated. The laundry remains in the rins-
ing water.
Switch on the appliance or put it in
standby mode.
If the control panel does not respond,
press and hold
5 seconds to restart the appliance.
Activate or deactivate remote start.
→ Page 37
→ "Childproof lock", Page 34
→ "Basic settings", Page 38
Buttons en
or liquid de-
or
until the display
for approximately
25
Advertisement
Table of Contents
