Changing The Basic Set- Tings; Cleaning And Servicing; Cleaning The Drum; Cleaning The Detergent Drawer - Siemens WM14N29XEP User Manual And Installation Instructions

Table of Contents

Advertisement

en Cleaning and servicing
15.2 Changing the basic set-
tings
Set the programme selector to po-
1.
sition 1. → Page 31
Press inicio / pausa + carga and,
2.
at the same time, turn the pro-
gramme selector to position 2.
The display shows the current
a
value.
Use the programme selector to se-
3.
lect the required basic setting.
→ Page 31
To change the value, press
4.
min..
To save the changes, switch off
5.
the appliance.

Cleaning and servicing

16 Cleaning and servi-
cing
To keep your appliance working effi-
Cleaning and servicing
ciently for a long time, it is important
to clean and maintain it carefully.
16.1 Cleaning the drum
CAUTION
Risk of injury!
Permanently washing at low temper-
atures and a lack of ventilation for
the appliance may damage the drum
and cause injury.
Regularly run a programme for
cleaning the drum or wash at tem-
peratures of at least 60 °C.
Leave the appliance to dry after
every operation with the door
open, and leave the detergent
drawer to dry.
Run the limp. tambor programme
without laundry but with washing
powder that contains oxygen
bleach or a a cleaning agent for
32
caring for the inside of the appli-
ance.
→ "Accessories", Page 27
16.2 Cleaning the detergent
Pull out the detergent drawer.
1.
Press down on the insert and re-
2.
move the detergent drawer.
⁠ ter-
Pull out the insert upwards.
3.
drawer

Advertisement

Table of Contents
loading

Table of Contents