en Programme counter
15.2 Changing the basic set-
tings
Set the programme selector to po-
1.
sition 1.
Press
Start / Reload and, at the
2.
same time, turn the programme
selector to position 2.
The display shows the current
a
value.
Set the programme selector to the
3.
required position.
→ "Overview of the basic settings",
Page 33
To change the value, press
4.
ish in.
To save the changes, switch off
5.
the appliance.
Programme counter
16 Programme counter
The program counter displays the
Programme counter
number of finished programmes.
16.1 Calling up the pro-
gramme counter
Set the programme to position 1.
1.
Press
Start / Reload and set
2.
the programme to position 2 at the
same time.
Set the programme to position 5.
3.
34
Cleaning and servicing
17 Cleaning and servi-
cing
To keep your appliance working effi-
Cleaning and servicing
ciently for a long time, it is important
to clean and maintain it carefully.
17.1 Cleaning the drum
CAUTION
Risk of injury!
Permanently washing at low temper-
atures and a lack of ventilation for
the appliance may damage the drum
and cause injury.
Regularly run a programme for
▶
cleaning the drum or wash at tem-
peratures of at least 60 °C.
Leave the appliance to dry after
▶
every operation with the door
open, and leave the detergent
drawer to dry.
Run the
▶
gramme without laundry but with
washing powder that contains oxy-
Fin-
gen bleach or a a cleaning agent
for caring for the inside of the ap-
pliance.
→ "Accessories", Page 27
17.2 Cleaning the detergent
Pull out the detergent drawer.
1.
Drum Clean pro-
drawer