Changing the Engine Oil and Filter (continued)
Changing the Oil Filter
1. Rotate the oil filter
remove it.
2. Wipe the filter adapter
3. Apply a light coat of clean oil to the seal of the
new filter.
4. Thread the filter onto the filter adapter until the
filter contacts the adapter, then tighten the filter
an additional turn.
Note:
5. Add oil to the crankcase and install the filler
cap.
3466-706A
counterclockwise to
clean.
Do not overtighten the filter.
G468270
G453110
Page 6–15
Maintenance: Engine Maintenance