Safety Precautions - DwarfConnection DC-LINK-ULR1 User Manual

Safety Precautions

WARNING: READ BEFORE USE TO REDUCE THE RISK OF PERSONAL INJURY OR PROPERTY
DAMAGE, INCLUDING DAMAGE TO YOUR TRANSMITTER/RECEIVER AND OTHER POTENTIAL
HAZARDS.
HANDLING
Handle your DC-LINK system with care. You may damage the devices if you
disassemble, drop, bend, burn, crush or otherwise subject them to un necessary
force. Do not use a device with a damaged enclosure. Using a damaged
product may cause injury. Do not expose your devices to liquids of any kind!
This can cause a short circuit and overheating. If your devices do come
into contact with liquids, do not attempt to dry them using an external heat
source. If the device comes into contact with liquid or corrosive chemicals,
immediately turn off the power and remove the power supply. Do not operate
the device near fire, gas lines or electrical mains or in high humidity or dusty
surroundings.
Do not block or otherwise impede ventilation slots or unused connectors, as this
may result in a short circuit, fire or electric shock.
DC-LINK systems are designed to work in ambient temperatures between
0° and 40°C / 32° to 100°F and should be stored between ambient
temperatures of -20° and 60°C / 0° and 140°F. Ensure sufficient ventilation when
operating your DC-LINK system in warm temperatures to prevent overheating.
Do not leave your devices in places in which the temperature may exceed
60°C / 140°F as this may damage the product or pose a potential fire risk.
Keep your device away from heat sources and out of direct sunlight. If your
device becomes too hot, disconnect it from its power source if it is plugged in,
move it to a cooler place, and do not use it until it has cooled. If you accidently
operated your DC-LINK system at temperatures lower than 0° C / 32° F try to
avoid condensation water: Do not allow your device to cool down in the cold!
Put your device in the case immediately after turning it off!
CARE & CLEANING
Unplug the product and power adapter before cleaning, during lightning
storms, or when unused for extended periods of time. Use a clean, soft, and
dry cloth to clean devices and their accessories. Do not use any chemical
detergent, powder, or other chemical agents (such as alcohol or benzene)
to clean the product or accessories.
REPAIR, SERVICE & SUPPORT
Disassembling the devices may cause injury to you or damage to your device.
Do not attempt to repair your DC-LINK system yourself. Opening your device
voids warranty. If devices cease working or have been damaged, contact our
support team.
4