DwarfConnection DC-LINK-ULR1 User Manual page 14

AUTO indicates cinema mode, which triggers the fans using the start / stop flags
of the camera. Once you hit record, the fan will stop, ensuring total silence.
After recording, it will turn back on automatically. Cinema mode is bound to
metadata support* and only available with active SDI connection.
√ switches the fans on permanently. X switches the fans off.
Dark Mode
Dark Mode turns off any lights on your DC-LINK device. Press and hold + for 3
seconds to (de)activate Dark Mode. When in Encryption Mode, all receivers will
react to changes made on the transmitter and follow into or out of Dark Mode.
Encryption (for all MKII devices)
In encryption mode, the transmitter sends an encoded signal that only linked
receivers can read, making it easy to protect confidential content that is not
meant for everyone's eyes.
To activate encryption mode, press and hold the MENU button on your device
to enter the encryption menu. Use + or – to check either ON or OFF and confirm
with MENU. The main menu will show either ENC or ENC to indicate whether
encryption is on or off.
To link your devices, set your transmitter and all the receivers to the same chan-
nel, then activate encryption on your transmitter. All receivers will follow into en-
cryption mode automatically. Settings remain active after turning your devices
off. This means that ENC can be prepared prior to shooting and will stay active
unless you turn it off.
A linked receiver does not HAVE to stay linked. To take a receiver out of the en-
crypted system, simply turn off ENC. Then you can easily access another (unen-
crypted) transmitter's images by choosing the referring channel within seconds.
To link back to the previous (encrypted) transmitter, turn ENC on again.
IMPORTANT:
Switching back and forth between two encrypted systems is not possible.
You cannot slip into an encrypted wireless system, if your receiver was not initi-
ally linked to the transmitter. If you want to add a new receiver to an encrypted
system, you need to link the whole system again.
14