Yamaha S-90 Owner's Manual page 32

4
Choose "Make Current" from the File menu. The setup for your S90 is now saved as the
current studio setup.
5
Choose "Quit" from the File menu to close OMS Setup.
n
Voice Editor is not compatible with versions of OMS earlier than 2.0.
OMS Port Setup
Having set up OMS, you now need to start up Voice Editor and set the OMS ports.
1
Start up Voice Editor by double-clicking its icon.
n
If AppleTalk is enabled, you will get an alert message. Click "OFF." It will take some time for AppleTalk
to be disabled.
2
Choose "OMS Port Setup" from Voice Editor's "MIDI" menu, then select the port settings.
In the following example, the tone generator is an S90 and its settings are applied to OMS.
Key Thru .................Check this if you are monitoring a sound generator module using an
MIDI In: ..................Select "S90-1."
MIDI Out: ...............Select "S90-1."
3
Click [OK] to close OMS Port Setup.
external keyboard.
32