Edit Window - Yamaha S-90 Owner's Manual

n
To select a block of voices, click the number of the first voice, hold down the [Shift] key, then click
the last voice.
n
A normal voice cannot be imported to a Drum voice or a Plug-in voice. Similarly, a Drum voice
cannot be imported to a Normal voice or a Plug-in voice.
5 Monitor ...................If you check this box, the bulk data for each voice you select from the
n
Monitoring will not be possible if the MIDI Out port and other parameters in the Editor Setup are not
set correctly. For further details, see
6 [Close] button ........Click this to close the Import dialog.

Edit Window

There are three types of voices you can edit using Voice Editor: Normal voices, Drum voices, and
Plug-in voices. In the Library window, click the tab containing the Normal voice/Drum voice/Plug-
in voice that you wish to edit. Then double-click the voice (or select it and click the "Edit Window"
button) to open the Edit window.
• Settings in the Edit window are transmitted via MIDI from your computer to your synthesizer
in realtime.
• Settings in the Edit window can be stored to a Library file.
• For details about each parameter, refer to the S90 Owner's Manual and Data List.
Voice Edit Window
When editing a voice, you will see the following screen:
1
3
8
!
list will be transferred to your synthesizer for monitoring. To monitor
the voice, use the keyboard of your synthesizer.
page 11.
Editor Setup button
Library Window button
Store button
2
Compare button
15
4 5 6
% $
7
)
9
@
#