Yamaha S-90 Owner's Manual page 25

& FILTER ....................Drag one of the handles horizontally to adjust the Element's "HPF
n
To set these values directly, select the "OSCILLATOR" tab of the DRUM KEY DETAIL Dialog.
* AMPLITUDE EG .....Drag the first handle (furthest to the left) horizontally to adjust the
n
To set these values directly, select the "PARAMETER" tab of the DRUM KEY DETAIL Dialog.
( EQ ...........................Click on the text box and select the EQ type. With the "EQ L/H" and
n
To set these values directly, select the "OSCILLATOR" tab of the DRUM KEY DETAIL Dialog.
º LEVEL .....................Use this knob to set the level of the Element.
¡ PAN .........................Use this knob to set the stereo position of the Element.
™ RNDM PAN..............Use this knob to set the Element's "Random Pan" depth.
£ ALTER PAN.............Use this knob to set the "Alternate Pan" depth.
¢ Output Assignment
selector ..................Click on the text box and select the output(s) to which the Element will
∞ EF1/EF2/THRU .......Click the [EF 1] switch to pass the signal through Insertion Effect 1.
§ REVERB..................Use the "REVERB" knob to set the level of the signal from Insertion
¶ CHORUS .................Use the "CHORUS" knob to set the level of the signal from Insertion
• DETAIL ....................Click this to open the "DRUM KEY DETAIL" dialog and input all
n
The signal output from EQ is sent to LEVEL at the left bottom of the Drum Key Dialog.
n
If the OSCILLATOR TYPE is set to "Voice," parameters 7, 9 -14, 16 -19, 22, and 23 described
above are not available.
Cutoff Frequency." Drag the other handle vertically to adjust its "LPF
Resonance," and horizontally to adjust its "LPF Cutoff Frequency."
Element's "Attack Time." Drag the second horizontally to adjust its
"Decay 1 Time," and vertically to adjust its "Decay 1 Level." Drag the
last handle (furthest to the right) horizontally to adjust its "Decay 2
Time."
"P.EQ" types, you can adjust some EQ parameters using the handles
in the graphs. Drag one of the handles horizontally to adjust the
Element's "EQ Low Frequency," and vertically to adjust its "EQ Low
Gain." Drag the other handle horizontally to adjust the Element's "EQ
High Frequency" (or "EQ Resonance" if the P.EQ type has been
chosen) and vertically to adjust its "EQ High Gain."
be sent.
Click [EF 2] to pass it through Insertion Effect 2. Click [THRU] to
bypass the Insertion Effects.
Effect 1/2 (or the by-passed signal) sent to the Reverb unit.
Effect 1/2 (or the by-passed signal) sent to the Reverb unit.
Element values directly (except the Keyboard note assignment).
25