Yamaha S-90 Owner's Manual page 20

$ ASSIGNABLE 1/2 settings
Use the knobs to set the value of the parameter assigned to each of the assignable 1/2
controllers.
% MEQ GAIN CONTROL settings
Use the knobs to set the gain for each frequency band of the four-band EQ.
ELEMENT Unit
1 EL (Element) 1 to 4 buttons
Click these to open the corresponding "ELEMENT" dialogs.
n
For Drum voices, you will see the following panel. Click [KEY C0...C6] to open the
"Drum Key" dialog
n
For Plug-in voices, you will see the following panel. Click [DETAIL] to open the "Plug-in Voice Detail" dialog.
1
VOICE BANK ....... Determines the Plug-in voice bank.
2
VOICE NUMBER .. Determines the Plug-in voice number.
3
LFO ...................... Determines the Speed of LFO, Pitch Modulation, and Delay.
4
NOTE SHIFT ........ Determines the amount of Note Shift (key transpose).
Click [NATIVE PARAM] to open the "NATIVE Parameter" dialog. Select the Plug-in board to be edited at
the top left of the keyboard illustration on the window.
1 2 3
(page 24).
1
3
20
4
2
4