Climate Range; Installation Notes; Adjoining Cabinets/Units - Miele KWT 2662 ViS Operating And Installation Instructions

Climate range

The wine conditioning unit is designed
for use within specific ambient
temperatures (climate range). Do not
use it in ambient temperatures for which
it is not designed. The climate range is
stated on the data plate inside the wine
conditioning unit.
Climate range
SN
N
ST
T
A lower room temperature leads to the
compressor switching off for longer
periods. This can cause the internal
temperature in the wine conditioning
unit to rise with the risk of wine
deteriorating and going off.

Risk of damage due to high
humidity.
In environments with high humidity,
condensation can build up on the
external wine conditioning unit
panels, which can cause corrosion.
Install the wine conditioning unit with
sufficient ventilation in a dry and/or
air-conditioned room.
After installation, make sure that the
appliance door closes properly, the
ventilation gaps are not covered and
that the wine conditioning unit has
been installed in accordance with
these operating and installation
instructions.
Ambient room
temperature
+10 °C to +32 °C
+16 °C to +32 °C
+16 °C to +38 °C
+16 °C to +43 °C

Installation notes


Risk of damage and injury from
the wine conditioning unit tipping
over.
The wine conditioning unit is very
heavy and can tip forwards when the
appliance door is open.
Keep the appliance door shut until
the wine conditioning unit has been
built in and secured in its building-in
niche in accordance with these
operating and installation
instructions.
Due to its weight and size, the wine
conditioning unit must be installed
by two people.

Adjoining cabinets/units

The wine conditioning unit is screwed
to the adjoining cabinets/units to the
side and above. For this reason, it is
essential that all cabinets/units are fixed
to the ground or wall.
Installation
17