Installation
Close the appliance door and check
the distance between the door and
adjacent furniture fronts again.
Place the washers and nuts back
in position and tighten the nuts .
Tighten the screws in the angle
trims . The furniture front is now
secured.
Open the appliance door.
Remove the spacers from the
furniture front.
42
Fitting the mounting bracket
The mounting bracket is used to secure
the furniture front to the bottom of the
appliance door.
Do not mount the fixing brackets until
the wine conditioning unit (or side-by-
side combination, if applicable) has
been installed and the furniture fronts
have been aligned.
Open the appliance door as far as it
will go.
Slide the fixing bracket from the
outside onto the screw at the bottom
of the appliance door.