Climate Class - Miele KWT 2601 SF Operating And Installation Instructions

Wine conditioning unit
Table of Contents

Advertisement

Climate class

The wine conditioning unit is designed
for use within a certain climate range
(ambient temperatures) and should not
be used outside this range. The climate
range of the wine conditioning unit is
stated on the data plate inside it.
Climate class
SN
N
ST
T
Operating in a room which is too cold
will cause the compressor to turn off for
too long, causing the internal tempera-
ture in the appliance to rise, resulting in
damage.
Room tempera-
ture
50° to 90°F
(10° to 32°C)
61° to 90°F
(16° to 32°C)
61° to 100°F
(16° to 38°C)
61° to 109°F
(16° to 43 °C)
Installation information
IMPORTANT
In environments with high humidity
condensation may appear on the ex-
ternal surfaces of the wine condition-
ing unit.
Condensate can cause corrosion on
external appliance walls.
For prevention, it is advisable to in-
stall the wine conditioning unit with
sufficient ventilation in a dry and/or
air conditioned room.
After installation make sure that the
appliance door closes properly, the
air vents are not covered and that
the wine conditioning unit has been
installed in accordance with these in-
stallation instructions.
In environments with a tropical
climate (above approximately 90°F
(32°C) and above approximately
70 % humidity), the wine condition-
ing unit must be operated in an air-
conditioned room.
Otherwise, it is not possible to guar-
antee that the wine conditioning unit
will operate without issues.
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kwt 2611 sf

Table of Contents