Sending Personal Computer Files To A; Vmjcms Host - IBM 3270 Manual

Sending Personal Computer Files
to a VM/CMS Host
To send a file to a disk controlled by your
VMjCMS host:
1. Jump to a VMjCMS host window.
2. If it is not already enlarged, you can enlarge
it.
3. If you are not already logged on, log on to
your VM host.
4. Make sure that the CMS ready message is the
last thing on your screen:
Or, if your screen is clear, make sure that no
applications are running and that nothing is
holding your CMS session. The word
RUNNING should appear in the lower right
corner of your screen.
RUNNING
If the word is HOLDING press the Reset key
before your try to send any files to the host.
Note:
If your receive any messages in your
host window while you are sending
files, the files may not be received. To
7-2 Book 3 - Using the Control Program