Cornering Windows - IBM 3270 Manual

Cornering Windows
To help speed up moving windows around on
your screen, you can move windows from corner
to corner. If your windows are full size, you
cannot corner them.
To move a window from corner to corner:
1. Use the Jump key to choose the window you
want to corner.
2.
If the window fills the screen, press the
Enlarge key to make it smaller.
If the window does not get smaller, you
cannot corner it.
3. Press the WSCtrl key.
4. Press the Corner key (PFIO).
The active window will move first to the
upper left corner of the screen. Its top and
left border will disappear.
5. If you want to move it to a another corner,
press the PFIO key again. Keep pressing this
key until the window is in the corner you
want.
6. If you want to get the borders back, press the
PFll· key, and use the Cursor keys to move
the window until all the borders show.
7. If you want to corner another window, repeat
steps 1 and 4.
8. When you want to go on with other work,
press the WSCtrl key again.
You are done.
9-32 Book 3 - Using the Control Program