IBM 3270 Manual page 210

INDFT
INDFTOI0 Host has not responded within
timeout period: Refer to
reference manual for more
information
Explanation: The host has not responded to' the
file transfer within several seconds.
User Response: If the host session screen shows
HOLDING, you can switch to the host session
and press Clear (in VM/CMS) or PA2(inTSO).
This should start file transfer. If )(
SYSTEM
or
)(
):.
appears in the host session screen operator
information area, wait for it to clear. These
indicate the system is working slowly. If you
want to halt file transfer after several time-out
messages appear, switch to the host session, press
Reset to clear the operator information area, and
pressPF2 to halt the file transfer, or Clear to
continue. This situation can be caused by line
problems.
INDFTOll Lost contact with host: File
transfer canceled
Explanation: The host is inactive.
User Response: Go back to Chapter 13, and
continue with question 2 to locate the cause of
the failure.
Appendix A. Messages A-25