Getting Back Your Automatic Keystroke Recordings - IBM 3270 Manual

Getting Back Your Automatic
Keystroke Recordings
If you have made keystroke recordings and saved
them, you can get them. When you turn on the
system, it doesn't get them automatically. You
have to get them.
Here's how you do it:
1. Make sure that your work station is not in
Control Mode.
2. Press the Jump key to make a personal
computer session active.
3. Type: indrstr autokey.
Or:
I
A>;nd""
INDRSTR AUTOKEY will get only your
recording. INDRSTR will get your windows,
notepads, and keystroke recordings.
Note: You can get your recordings back
automatically by adding the INDRSTR or
the INDRSTR AUTOKEY command to a
system file called AUTOEXEC.BAT. See
Chapter
12
if you want to use this file.
11-20 Book 3 - Using the Control Program