Buttons On Remote Controller; Operation Introduction Of Remote Controller - Airwell WFAE User Manual

Introduction of Remote Controller

Buttons on Remote Controller

AUTO
COOL
DRY
FAN
HEAT
ON/OFF
_
FAN
SLEEP
Icon Display on Remote Controller
For auto operation
Set temperature

Operation introduction of remote controller

Note:
When power is connected(stand by condition), you can operate the air conditioner through the remote controller.
When unit is on, each time you press the button on remote controller, the sending signal icon
will blink once. If the air conditioner gives out a beep sound, it means the signal has been sent.
When unit is off, set temperature will be displayed on the remote controller(If the light of indoor unit display is turned on, the
corresponding icon will be displayed); When unit is on, it will display the icon of the on-going function.
1. ON/OFF Button
Press this button to turn unit on/off.
2. MODE Button
Pressing this button once can select your required mode circularly as below(the corresponding icon
selected):
T-ON T-OFF
SWING
SLEEP
LOCK
SPEED
MODE
+
SWING
TIMER
Timer on Timer off
T-ON T-OFF
AUTO
For cooling
COOL
For drying
DRY
For fan only
FAN
For heating
HEAT
AUTO COOL
ON/OFF button
MODE button
+/- botton
FAN button
SWING button
SLEEP button
TIMER button
Sending signal
SWING For air swing
For sleeping
SLEEP
LOCK
For locking
For setting fan speed
SPEED
Set time
DRY FAN HEAT(For cooling and heating model)
on the display of remote controller
will be lit up after the mode is