Remote Controller Functions; Infrared Wireless Remote Controller - Airwell HDLA High Wall Technical Manual

2. Remote Controller Functions

2.1

Infrared Wireless Remote Controller

R51M/E(Standard)
Remote Controller Specifications
Model
Rated Voltage
Reaching Distance
Environment Temperature
Range
Buttons and Functions
1. TEMP DOWN Button : Push this button to decrease the
indoor temperature setting in 1℃increments to 17℃.
2. TEMP UP Button: Push this button to increase the
indoor temperature setting in 1℃increments to 30℃
3. MODE Button: Once pressing, running mode will be
selected in the following sequence:
NOTE: No heating mode for cool only type unit.
4. SWING Button: Push this switch button to activate auto
swing feature of the horizontal louver. Push it again to
R51M/E
3.0V (Dry batteries R03/
LR03×2)
8m
-5℃~60℃(23℉~140℉)
stop.
5. RESET Button (inner located): Once the recessed
RESET button is pressed, all of the current settings will
be cancelled and the controller will return to the initial
settings.
6. AIR DIRECTION Button: Press this button to change the
swing angle of the louver. The swing angle of the louver
is 6 degree for each press. When the louver swing at a
certain angle which would affect the cooling and heating
effect of the air conditioner, it would automatically change
the swing direction . No symbol will appear in the display
area when press this button. (Not applicable to units
without this function).
7. LED DISPLAY Button: Press this button to clear the digit
display in the air conditioner, press it again to activate it
(Not available for the units without LED display window).
8. FAN SPEED Button: Fan speed will be selected in
following sequence once pressing this button:
9. ON/OFF Button: For turning on or turning off the air
conditioner.
10. TIME ON Button: For time ON setting. Press this button
to activate the Auto-on time setting. Each press will
increase the time setting in 30 minutes increments, up to
10 hours, then at 1 hour increments up to 24 hours. To
cancel the Auto-on time setting, just press the button until
the time setting is 0.0.
11. SLEEP Button: Press this button to go into the Energy-
Saving operation mode. Press it again to cancel. This
function is only can be used on COOL, HEAT and AUTO
mode and maintain the most comfortable temperature for
you.
12. TIME OFF Button: For time OFF setting. Press this
button to activate the Auto-off time setting. Each press
will increase the time setting in 30 minutes increments, up
to 10 hours, then at 1 hour increments up to 24 hours. To
cancel the Auto-off time setting, just press the button until
the time setting is 0.0.
13. LOCK Button(inner located): When you press the
recessed LOCK button, all current settings are locked in
and the remote controller does not accept any operation
except that of the LOCK. Press again to cancel the LOCK
mode.
14. TURBO Button: Active/Disable Turbo function. Turbo
function enables the unit to reach the preset temperature
at cooling or heating operation in the shortest time(if the
indoor unit does not support this function, there is no
corresponding operation happened when pressing this
button.)
 Page 40 