Table of Contents
Advertisement
Chengdu Ebyte Electronic Technology Co.,Ltd.
filled in through the conversion input system;
If the network ID input by the transmitter A is 02 and the network ID input by the receiver B is 10, then the relay R
sets the module address, convert the hex value 0X020A into the decimal value 522 as the module address filled in
by the relay R;
That is, the module address value that the relay terminal R needs to be filled in is 522.
10 Firmware Upgrade
The E610 module supports serial port firmware upgrade. When special after-sale support is needed, you can contact
us to obtain the corresponding firmware for upgrade processing.
Method 1: Use the TTL to USB tool to connect the module VCC / TX / RX / GND, and control the M0 / M1 level
to enter the configuration mode. Select the firmware upgrade tab in the official website configuration tool, click the
"Open File" button to select the firmware, then click to download, and wait for the progress bar 100%.
Method 2: the module first power, the module AUX pin and GND pin on (at least 1 second before release), the
module will automatically enter the upgrade mode, and then use the configuration tool to download the firmware.
Copyright ©2012–2023，Chengdu Ebyte Electronic Technology Co.,Ltd.
E106-xxxTxxS User Manual
25
Advertisement
Table of Contents
