Configuration Tool Description - Ebyte E610 T S Series Product Manual

Chengdu Ebyte Electronic Technology Co.,Ltd.

9 Configuration Tool Description

The following figure shows the display interface of E610-433T 30S. Users can switch to command mode through

M0 and M1, and quickly configure and read parameters in the upper computer.
In the configuration computer, the module address, frequency channel, network ID and key are all decimal display

mode; taking the values of each parameter:
Network address: 0~65535
Frequency channel: 0~61
network ID:0~255
Key: 0~65535
When the user uses the upper computer configuration relay mode, they need to pay special attention to, because in

the upper computer, each parameter is decimal display mode, so the module address and network ID need to be
Copyright ©2012–2023，Chengdu Ebyte Electronic Technology Co.,Ltd.
E106-xxxTxxS User Manual
24