Connections - Pioneer PD-F100 Operating Instructions Manual

CONNECTIONS
CONTROL
OUT
Stereo amplifier
YO INTERFACE
Cassette deck
@ Make sure that all of the components are turned off before making connections.
Control cable (except for European models)
@ being used in the future
{U.S. and Canadian models
CD-DECK SYNCHRO cable
=~» To the CONTROL IN jack of the
Pioneer component bearing the
mark.
CD player
Making connections
{{} Connect the OUTPUT jacks of this unit to the input jacks (CD or
AUX) of the amplifier. Make sure that the white plugs are
connected to the left (L) jacks and the red plugs to the right (R)
jacks.
® Be sure not to connect this unit to the amplifier's PHONO
jacks, as sound will be distorted and normal playback will not
be possible.
{2 Connect the power cord to a household AC wall outlet.
e@ Make sure plugs are inserted fully into the wall outlet.
NOTE:
Oo not connect the power cord to an AC outlet on your amplifier,
CD-Deck synchro function
If you have a Pioneer cassette deck provided with the CD-Deck
synchro function, connect the CD-DECK SYNCHRO jacks of the
CD player and cassette deck. With this function, synchro recording
can be carried out between player and deck.
« For details on connections and operation, refer to the operating
instructions supplied with the cassette deck.
@ The CD-DECK SYNCHRO cable is not supplied with the CD
player,
System remote control with a Pioneer stereo
amplifier that has the mark (except for
European models)
When a Pioneer stereo amplifier bearing the mark is used,
connect the CONTROL IN jack on the rear panel of the CD player
to the CONTROL OUT jack of the amplifier. This will enable the
CD player to be controlled using the remote control unit supplied
with the stereo amplifier. If you do not plan to use this feature, it
is not necessary to connect CONTROL IN/OUT jacks.
e@ The control cable is not supplied with the CD player.
@ The remote control unit supplied with the amplifier can be used
to control Play, Stop, Pause, Track/Disc Search and Disc Change
operations,
e For instructions regarding connections and operation, reter to
the operating instructions provided with your stereo amplifier.
NOTES:
@ When a control cable is connected to the player's CONTROL IN
jack, direct contro! of the player with the remote control unit is
not possible. Operate the player with the remote control unit
by aiming it at the amplifier.
® Be sure to connect both of the control cable's plugs securely to
the CONTROL IN and CONTROL OUT jacks. Do not connect
only one end of the cable.
© Be sure to turn off the power of the amplifier before connecting
the power cord and output cable.
7
<PRB1213>
En