Table of Contents
Advertisement
Connecting the CD Player
Audio Connections
• Before making any connections, read the manu-
als supplied with your other components.
• Don't connect the power cord until you've com-
pleted and double-checked all connections.
• We will not accept responsibility for damage aris-
ing from the connection of equipment manufac-
tured by other companies.
Connection Color Coding
RCA-type audio connections are usually color-
coded: red and white. Use red plugs to connect
right-channel audio inputs and outputs (typically
labeled "R"). Use white plugs to connect left-chan-
nel audio inputs and outputs (typically labeled "L").
Analog audio
cable
Left (white)
Right (red)
• Push plugs in all the way to
make good connections
(loose connections can
cause noise or malfunc-
tions).
RCA/phono
audio cable
(supplied)
Optical digital
cable (not
supplied)
CD
Optical IN Coaxial IN
Hi-fi amp, AV receiver
• To prevent interference, keep audio cables away
from power cords and speaker cables.
Optical/Coaxial Digital Jack (PD-30AE
only)
The unit supports 16 bit, 44.1 kHz PCM signal digi-
tal output.
The PD-30AE's optical digital jack has a shutter-
type cover that opens when an optical plug is
inserted and closes when it's removed. Push the
plug in all the way.
Caution: To avoid damaging the shutter, hold the
optical plug straight when inserting and removing.
Note:
Left (white)
Do not put anything on top of the PD-30AE/PD-
10AE, as it may interfere with proper ventilation.
Right (red)
Right!
Wrong!
PD-30AE only
Connect one or
the other
Coaxial cable
(not supplied)
Connect one or
the other
Disconnect the power
cord before making
any connections!
Coaxial cable
(not supplied)
Coaxial IN
Optical IN
CD-R, MiniDisc, DAT recorder
Optical digital
cable (not sup-
plied)
13
En-
Advertisement
Table of Contents
