Matrox Orion Installation And Hardware Reference page 55

Pin Signal
42 GROUND
43 VID_IN4
44 VID_IN2
1, 6, 16, 21-22, Not used
32, 36-38
Use Matrox cable DBHD44-TO-13BNC to interface to this
connector. This cable has thirteen BNC connectors and a
high-density 44-pin D-Subminiature male connector. The
DBHD44-TO-13BNC cable allows you to attach up to eight
analog video sources and a trigger input (either opto-isolated
or TTL). The DBHD44-TO-13BNC cable also has 3 BNC
connectors for encoded video output of red, green, and blue
components.
The open-ended DH44-TO-13BNC/O cable is also available for
customers who need to customize their own cables.
Connect the BNC-TO-SVHS adaptor cables to the
DBHD44-TO-13BNC for Y/C inputs. Note that Matrox supplies
more Y/C adapters with the cable than the number of inputs
the board can support.
For customers planning to build their own cable, parts can be
purchased from:
Manufacturer:
Connector and shell: HDT44P
Board input and output connectors
I/O Description
- Ground.
I Analog Video Input 4
(CVBS4, C2 or SYNC1).
I Analog Video Input 2
(CVBS2, C1 or GREEN1).
NorComp Interconnect
Devices
55