Optional Parts; Handling Components - Matrox Orion Installation And Hardware Reference

12 Chapter 1: Introduction
Caution

Optional parts

You might have also ordered one or more of the following:
MIL-32/CD, which includes MIL and ActiveMIL; or
MIL-Lite/CD, which includes MIL-Lite ActiveMIL-Lite. MIL
and MIL-Lite CDs include intellicam.
A DBHD44-TO-13BNC input cable with a high density
44-pin male connector and thirteen BNC-type connectors. Six
BNC-TO-SVHS adaptor cables for Y/C input are shipped with
the DBHD44-TO-13BNC cable, although only four can be
used.
DH44-TO-13BNC/O input cable with a high density DB-44
male connector on one end and both open-ended wires and
thirteen BNC-type connectors on the other end. This cable is
required if you want to connect to synchronization and
control signals.

Handling components

The electronic circuits in your computer and the circuits on
Matrox Orion are sensitive to static electricity and surges.
Improper handling can seriously damage the circuits.
Drain static electricity from your body by touching a metal
fixture (or ground) before you touch any electronic
component.
Avoid letting your clothes come in contact with the circuit
boards or components.
Before you add or remove devices from your system, always
turn off the power to your computer and all its peripherals.