Matrox Orion Installation And Hardware Reference page 17

5. Lower the board gently into the slot.
SCREW
METAL
PLATE
6. Once the board is perfectly aligned, press the board firmly
but carefully into the slot.
7. Anchor the board by replacing the screw that you removed.
If you do not plan to connect a video input device to the
expanded video I/O adaptor bracket, proceed to step 10.
8. Attach the expanded video I/O connector on the adapter
bracket to the expanded video I/O interface connector using
the ribbon cable.
Expanded video I/O
connector (DB-44)
Ribbon cable
Video input connector
TV output connector
VGA output connector
(DB-15)
Note: AGP version presented here. PCI version might vary slightly.
Installing Matrox Orion
AGP or PCI BOARD SLOT
Stripe
17
Expanded video I/O
adapter bracket
Expanded video I/O
interface connector