4.2.2 Mstar USB-serial driver
First use Mstar bebug Tool, and you have to install drive software for bebug board.
If your PC is Windows XP system:
First install FTCUNIN.EXE of FTC100103(MSTAR) rar file in your PC.
This is a drive software of Mstar
Another:
If your PC is Win7 system, you will have to install CDM20802_Setup_WIN7 rar file,and then open
the software of SecureCRT in your PC.
4.2.3 Mstar Tool upgrading
1) How to get the Device ID password?
●
Connect the board with your PC via the debug tool,
With MSTV_Tool_4161 tool , run MSTV_Tool.exe
● Ensure "
" button connected correctly,then Click "Show DeviceID"button,you will get 22 bit device ID。
To ensure that the Device ID whether is 22 bit ,if not 22 bit, indicates that's wrong.
● Send the ID to the IC developer, Waiting for the IC developer feedback the IC proper ID password.
- 27 -