Advertisement
Step 2: Set up a WAN connection
Choose WAN > PON WAN.
Tick Enable VLAN.
Enter the VLAN ID provided by your ISP.
Set Channel Mode to PPPoE.
Set Connection Type to INTERNET.
Enter the PPPoE UserName and Password provided by your ISP.
Set other parameters according to your ISP and your own need.
Click Apply Changes.
Click OK when Change setting successfully is shown on the page.
Done.
To access the internet:
•The wired device (such as a computer) can directly access the
internet.
•Connect the LAN port of the ONT to the WAN port of a Wi-Fi router
(dynamic IP address) to provide wireless coverage.
Advertisement
