Baumatic B 70SS Series Instruction Manual page 18

INSTALLATION INSTRUCTIONS
6) Take the fixing bracket 'G' (Fig. 4 – previous page), centre it
with respect to the mark you previously made, keeping it in
contact with the ceiling, and then mark the anchoring holes
('H').
7) Using a drill bit with a 6mm diameter, make two holes on the
fixing marks you previously made (see below).
8) Insert the expansion fixings (rawlplugs) provided, put bracket
'G' (see Fig. 4 on previous page) in position and secure it with the
screws provided.
9) Lift casing 'B' up to the ceiling and secure it to the bracket 'G',
inserting the screws provided in the holes 'M' (Fig. 4 – previous
page).
17
– Fitting the Chimney