Hover-1 Epsilon Operation Manual page 15

FAILURE TO FOLLOW ANY OF THE FOLLOWING SAFETY
PRECAUTIONS MAY LEAD TO DAMAGE TO YOUR EPSILON, DAMAGE
TO PROPERTY, VOID YOUR MANUFACTURER WARRANTY, AND MAY
CAUSE SERIOUS BODILY INJURY OR DEATH.
Before using your Epsilon, be sure to familiarize yourself with the
operating procedures.
OPERATING YOUR Epsilon
Make sure the Epsilon is fully charged before initial use. For charging
instructions, please refer to "CHARGING YOUR EPSILON" on page 18.
Stand directly behind your Epsilon and place one foot on the
corresponding foot mat (as shown in the diagram below). Keep your
weight on the foot that is still on the ground, otherwise the Epsilon may
begin to move or vibrate, making it di icult to step on evenly with your
other foot. When you are ready, shift your weight to the foot already
placed on the Epsilon and step on with your second foot quickly and
evenly.
Find your center of gravity. If your weight is distributed correctly on the
foot mats and your center of gravity is level, you should be able to stand
on your Epsilon just as if you were standing on the ground.
On average, it takes 3 5 minutes just to get comfortable standing on
RIDING YOUR Epsilon
Stay relaxed and step on quickly, con idently,
and evenly. Imagine climbing stairs, one foot,
then the other. Look up once your feet are even.
The hoverboard may vibrate or spin in one
direction if weight and pressure are applied to
only one foot mat. THIS IS NORMAL.
NOTES:
13