Yamaha MU100 Supplementary Manual page 35

MIDI data format
2.1.3.1 XG System On
This system exclusive message causes the MU100
to function as an "XG"-compatible tone generator.
11110000
01000011
0001nnnn
01001100
00000000
00000000
01111110
00000000
11110111
When On is received, the SOUND MODULE
MODE will be set to XG, and all MIDI messages
defined by XG such as NRPN or bank select etc.
can be received.
Since approximately 50[ms] are required in order
to execute this message, please allow an
appropriate interval before transmitting the next
message.
2.1.3.2 XG System parameter change
This message sets the XG SYSTEM block (refer
to tables <1 -1>, <1 - 2>).
2.1.3.3 Multi Effect1 parameter change
This message sets the MULTI EFFECT1 block
(refer to tables <1 - 1>, <1 - 4>).
2.1.3.4 Multi EQ parameter change
This message sets the MULTI EQ block (refer to
tables <1 - 1>, <1 - 5>).
2.1.3.5 Multi Effect2 parameter change
This message sets the MULTI EFFECT2 block
(refer to tables <1 - 1>, <1 - 6>).
2.1.3.6 Display parameter change
This message sets the DISPLAY block (refer to
tables <1 - 1>, <1 - 8>).
2.1.3.7 Multi Part parameter change
This message sets the MULTI PART block (refer
to tables <1 - 1>, <1 - 9>).
2.1.3.8 AD Part parameter change
This message sets the AD PART block (refer to
tables <1 - 1> , <1 - 10>).
2.1.3.9 AD System parameter change
This message sets the AD SYSTEM block (refer
to tables <1 - 1>, <1 - 11>).
36
Exclusive status
F0H
YAMAHA ID
43H
N:device Number
1NH
Model ID
4CH
Address High
00H
Address Mid
00H
Address Low
7EH
00H Data
End of Exclusive
F7H
MU100 MIDI
2.1.3.10 Drums Setup parameter change
This message sets the DRUMS SETUP block
(refer to tables <1 - 1> , <1 - 12>).
2.1.4 MU100 native parameter change (1)
This message sets parameters unique to the MU100. Each
message sets a single parameter.
As indicated below, the message format is in common with
the MU50, MU80, and MU90.
Exclusive status
11110000 F0H
YAMAHA ID
01000011 43H
0001nnnn 1NH N:Device Number
Model ID
01001001 49H
Address High
0ggggggg GGH
0mmmmmmm MMH Address Mid
Address Low
0lllllll LLH
0vvvvvvv VVH Data
: :
End of Exclusive
11110111 F7H
For parameters whose Data Size is 2 or 4, the number of
data bytes indicated by Size are transmitted.
2.1.4.1 MU100 System parameter
change
This message sets the SYSTEM block (refer to
tables <2 - 1>, <2 - 2>).
2.1.4.2 Remote Switch
This message sets the REMOTE SWITCH (refer
to tables <2 - 1>, <2 - 3>).
2.1.5 MU100 native parameter change (2)
This message sets parameters which are unique to the
MU100. Each message modifies a single parameter.
The format of this message is the same as for the MU90, as
shown below.
Exclusive status
11110000 F0H
01000011 43H YAMAHA ID
N:Device Number
0001nnnn 1NH
Model ID
01011001 59H
0ggggggg GGH Address High
Address Mid
0mmmmmmm MMH
0lllllll LLH Address Low
Data
0vvvvvvv VVH
: :
11110111 F7H End of Exclusive
For parameters whose Data Size is 2 or 4, the number of
data bytes indicated by Size are transmitted.
2.1.5.1 Current Performance parameter
change
This message sets the CURRENT PERFORMANCE
block (refer to tables <3 - 1>, <3 - 2>).