RETEST AFTER REPAIR
Should a machine under test be rejected for any reason requiring the removal of any mechanical part that could affect
the machine's electrical characteristics, or if any electrical components are repaired or replaced, the machine must be
retested.
Machine input and output
®
PRESTO
275
OCV
Max Input
Input Voltage
Rated Output
(open circuit voltage)
Current
U
0
Stick Mode
400Vac-3ph-50/60Hz
15,3A
70 V
180A/27,2V@100%
Output Current range
SMAW
5A - 270A
IMPORTANT !
After the repair, the unit shall be tested accordingly to the norm EN60974-4 Arc
welding equipment "In-service inspection and testing"