Charging Your Power Station - EcoFlow DELTA Pro Ultra Manual

After 12 hours of no load for the AC output ports, the AC power button will turn off
automatically.
EcoFlow 50 Amp Hub
You can connect one or two sets of DELTA Pro Ultra to the EcoFlow 50 Amp Hub for
recharging your car or other NEMA 14-50 plug-based appliances. To successfully link
one or two sets of DELTA Pro Ultra, follows steps below:
1. Connect one or two sets of DELTA Pro Ultra to the EcoFlow 50 Amp Hub.
2. Tap the main power button to power on DELTA Pro Ultra
3. Press the AC on/off button of the 50 Amp hub to link.

Charging Your Power Station

Charging From The Wall Outlet
You can recharge the product by connecting the supplied AC charging cable to the
fast charging input port of the product and a wall outlet. To adjust the charging
speed, you can either flick the AC charging speed switch or set it up in the EcoFlow
app.