Table of Contents
Advertisement
8. In "UHF mode" press
to switch to "Waiting for pairing", display status like this(only for
wireless version):
9. Press "mode" key
to "recording mode" display status like this:
Operation description:
1. Power switch of the voice amplifier:
Pull up the switch counterclockwise, turn on the amplifier after you hear a "click". It will broadcast
the current mode and the LED screen displays the current mode. Pull down the switch clockwise,
turn off the amplifier after you hear a "click". When it is switched off, the amplifier will remember
the current mode and automatically load the mode when you turn on it the next time.
2. Wired microphone voice amplification
9 / 17
Advertisement
Table of Contents
