R volution PlayerOne 8K Quick Start Manual page 10

8
Connecting your Player to your TV without AV Receiver
If you don't own a home theater receiver or soundbar, the most convenient and easiest way is to
connect your player directly to your TV. To do this, connect the HDMI output of your media player to a
free HDMI input on your TV. If you own a stereo amp, connect it to the player's 3.5 analog output using
a Mini-Jack to RCA cable.
Mini-Jack to RCA cable
RIGHT
LEFT
Audio Analog Input
If you get a BLUE SCREEN, it is because you are using HDMI Audio Only instead of HDMI Main for the TV.
!
Connecting your Player to your TV trough AV Receiver
If you own an AV receiver, the most convenient and easiest way is to connect your media player to your
TV through your AV receiver or soundbar. To do this, connect the HDMI Main output of your media player
to a free HDMI input on your AV receiver. Then connect the HDMI output of your AV receiver to your TV
or front projector. If your TV is compatible with 8K HDR, your AV receiver must also be compatible with
8K HDR. Otherwise, please use the S/PDIF optical output as explained on the next page.
Black Border
& Overscan
If you get a black border issue
all around your TV screen,
please go to your Tv settings
and set the correct aspect ratio
option to remove the black
border. (Fit to Screen option).
R
L
Audio Analog Amplifier
HDMI IN
HDMI Cable
HDMI Cable
HDMI Cable
HDMI OUT
AV Receiver
HDMI IN
TV / projector
HDMI IN
TV / projector